{
  "battery_net_bay": {
    "requested_mm": [
      75.4,
      40.4,
      18
    ],
    "orientation": "horizontal",
    "center_mm": [
      0,
      66.2,
      12.0
    ],
    "angle_deg": 90.0,
    "intersections": []
  },
  "controller_net_bay": {
    "requested_mm": [
      73.4,
      35.4,
      14
    ],
    "orientation": "horizontal",
    "center_mm": [
      0,
      64.5,
      10.0
    ],
    "angle_deg": 170.0,
    "intersections": []
  },
  "connector_net_bay": {
    "requested_mm": [
      23.4,
      12.4,
      10
    ],
    "orientation": "horizontal",
    "intersections": []
  },
  "electronics_hidden": {
    "battery_bounds_mm": [
      [
        -37.5,
        46.20000076293945,
        3.0
      ],
      [
        37.5,
        86.19999694824219,
        21.0
      ]
    ],
    "controller_bounds_mm": [
      [
        -87.09239196777344,
        -27.784019470214844,
        3.0
      ],
      [
        -39.94780731201172,
        50.184635162353516,
        17.0
      ]
    ],
    "base_top_mm": 34.0,
    "all_below_optical_tier": true
  },
  "courtyard": {
    "diameter_mm": 81.78,
    "height_mm": 181.57074652089273,
    "intersections": []
  },
  "entrance": {
    "clear_width_mm": 42,
    "floor_height_mm": 32.2,
    "arch_apex_mm": 79.0,
    "intersections": []
  },
  "front_bridge_fit": {
    "lateral_clearance_each_side_mm": {
      "O1": 2.0,
      "D1": 1.0
    },
    "inner_radial_clearance_to_frozen_B1_mm": 0.5,
    "intersections": [],
    "boundary": "Full-height parallel chord openings. O1 uses X=+/-17 mm and D1 uses X=+/-16 mm, parallel to the bridge sides X=+/-15 mm. The A1 inner end starts at R46 to clear the frozen B1 connector.",
    "parallel_corridors": [
      {
        "part": "O1",
        "width_mm": 34.0,
        "side_x_mm": [
          -17.0,
          17.0
        ],
        "z_span_mm": [
          0,
          80
        ],
        "residual_material_mm3": 1.7763568394002505e-15,
        "passed": true
      },
      {
        "part": "D1",
        "width_mm": 32.0,
        "side_x_mm": [
          -16.0,
          16.0
        ],
        "z_span_mm": [
          0,
          80
        ],
        "residual_material_mm3": 0,
        "passed": true
      }
    ],
    "all_parallel_chords_clear": true,
    "continuous_side_bands": [
      {
        "part": "O1",
        "side": "left",
        "front_edge_x_mm": -17.0,
        "z_span_mm": [
          21.300000000000004,
          22.3
        ],
        "radial_span_mm": [
          48.0,
          98.0
        ],
        "expected_material_mm3": 260.68780107360806,
        "missing_material_mm3": 0.001126965329531523,
        "passed": true
      },
      {
        "part": "O1",
        "side": "right",
        "front_edge_x_mm": 17.0,
        "z_span_mm": [
          21.300000000000004,
          22.3
        ],
        "radial_span_mm": [
          48.0,
          98.0
        ],
        "expected_material_mm3": 260.98327665522436,
        "missing_material_mm3": 0.0011270282504265141,
        "passed": true
      },
      {
        "part": "D1",
        "side": "left",
        "front_edge_x_mm": -16.0,
        "z_span_mm": [
          30.900000000000002,
          32.1
        ],
        "radial_span_mm": [
          47.9,
          96.3
        ],
        "expected_material_mm3": 302.0342312324346,
        "missing_material_mm3": 0.0008540219083554987,
        "passed": true
      },
      {
        "part": "D1",
        "side": "right",
        "front_edge_x_mm": 16.0,
        "z_span_mm": [
          30.900000000000002,
          32.1
        ],
        "radial_span_mm": [
          47.9,
          96.3
        ],
        "expected_material_mm3": 302.0342312324345,
        "missing_material_mm3": 0.0008540219083547524,
        "passed": true
      }
    ],
    "all_front_corners_filled": true
  },
  "a1_reinforcement": {
    "inner_wall_top_mm": 29.8,
    "inner_wall_radial_thickness_mm": 3.927046042967447,
    "rib_thickness_mm": 3.2,
    "front_bridge_thickness_mm": 3.2,
    "reinforcement_z_low_mm": 5.3,
    "probes": [
      {
        "feature": "front_top",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "outer_wall",
        "missing_material_mm3": 2.957513001426233e-06,
        "passed": true
      },
      {
        "feature": "inner_wall_0",
        "missing_material_mm3": 6.246187842298152e-07,
        "passed": true
      },
      {
        "feature": "inner_wall_90",
        "missing_material_mm3": 6.246187839820773e-07,
        "passed": true
      },
      {
        "feature": "inner_wall_180",
        "missing_material_mm3": 6.246187840302205e-07,
        "passed": true
      },
      {
        "feature": "rib_30",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "rib_255",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "rib_315",
        "missing_material_mm3": 0,
        "passed": true
      }
    ],
    "all_passed": true
  },
  "direct_seat": {
    "type": "gravity_only_D1_outer_structural_rim",
    "support_part": "D1",
    "seat_angle_deg": 341.59999999999997,
    "load_path": "B1 outer foot → D1 outer rim → O1 outer wall → A1 ledges",
    "radial_contact_width_mm": 1.9000000000000057,
    "rim_height_mm": 1.8000000000000007,
    "nominal_contact_area_mm2": 1078.137583156672,
    "seat_top_mm": 32.6,
    "frozen_B1_foot_bottom_mm": 32.6,
    "missing_D1_seat_material_mm3": 0.0002152956585850051,
    "missing_B1_foot_material_mm3": 0,
    "frozen_underside_intersections": [],
    "outer_lip_intersections": [],
    "inner_underside_vertical_clearance_mm": 0.5499999999999972,
    "locking": false,
    "all_passed": true
  },
  "frozen_parts": {
    "results": [
      {
        "part": "B1",
        "sha256": "ec7ec141d9c8b4dff798f797c1343347464f95368377850e1483d117dd134aa2",
        "expected_sha256": "ec7ec141d9c8b4dff798f797c1343347464f95368377850e1483d117dd134aa2",
        "passed": true
      }
    ],
    "all_passed": true
  },
  "front_bridge_root": {
    "method": "Frozen B1 annular front root remains unchanged; A1 starts at R46 and stays clear without using the former bayonet channel.",
    "z_span_mm": [
      31.4,
      32.2
    ],
    "missing_B1_material_mm3": 3.895326892720111e-05,
    "intersections": [],
    "passed": true
  },
  "optical_end_fit": {
    "type": "enlarged_D1_supported_by_O1_edges_without_O2",
    "central_diffuser_thickness_mm": 1.4,
    "outer_rim_height_mm": 1.8000000000000007,
    "diffuser_radial_span_mm": [
      47.9,
      96.3
    ],
    "a1_radial_clearance_mm": 0.4000000000000057,
    "central_b1_clearance_mm": 0.3999999999999986,
    "al_top_clearance_mm": 0.09999999999999787,
    "support_post_count": 0,
    "support_mode": "inner_and_outer_edges_only",
    "former_post_intersections": [],
    "central_above_intersections": [],
    "results": [
      {
        "feature": "inner_edge_support",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "outer_rim_support",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "inner_LED_D1_cover",
        "missing_material_mm3": 0,
        "passed": true
      },
      {
        "feature": "outer_LED_D1_cover",
        "missing_material_mm3": 0,
        "passed": true
      }
    ],
    "all_passed": true
  },
  "maintenance_fixture": {
    "intersections": [],
    "roof_to_table_mm": 9.42926025390625,
    "roof_to_fixture_foot_top_mm": 5.42926025390625,
    "support_plane_z_mm": 136.4,
    "estimated_each_load_N_at_1kg": 3.27,
    "footprint_directions_deg": [
      0,
      120,
      240
    ]
  },
  "external_power_port": {
    "type": "side_bottom_open_cable_slot",
    "diameter_mm": 10.0,
    "angle_deg": 90.0,
    "side_radius_mm": 100.0,
    "inner_radius_mm": 90.5,
    "outer_radius_mm": 105.0,
    "center_z_mm": 12.0,
    "z_span_mm": [
      -1.0,
      17.0
    ],
    "opens_to_bottom": true,
    "opens_to_side": true,
    "reaches_interior": true,
    "intersections": [],
    "boundary": "Horizontal side hole extended downward through the bottom edge; L1 only receives a matching edge relief. Not a bottom vertical hole, panel-mount DC socket, strain relief, or permission to energize."
  },
  "cover_lock_fit": {
    "count": 8,
    "rotation_deg": 9.0,
    "radial_guide_clearance_mm": 0.09999999999999432,
    "lug_outer_clearance_mm": 0.44999999999998863,
    "lug_z_clearance_each_side_mm": 0.25,
    "receiver_radial_thickness_mm": 6.400000000000006,
    "receiver_retainer_thickness_mm": 2.1500000000000004,
    "receiver_integrated_with_wall": true,
    "receiver_rib_count": 0,
    "detent_arm_length_mm": 8.0,
    "detent_thickness_mm": 1.0,
    "note": "The A1 receiver is now a continuous slotted flange united with the outer wall; no spoke ribs remain. Nominal geometry is not a strength or cycle-life certificate. Verify with T_cover_lock_A/T_cover_lock_B first.",
    "wall_continuity_probes": [
      {
        "angle_deg": 20.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 40.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 215.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 240.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 265.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 290.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 315.0,
        "missing_material_mm3": 0.0,
        "passed": true
      },
      {
        "angle_deg": 340.0,
        "missing_material_mm3": 0.0,
        "passed": true
      }
    ],
    "all_wall_continuity_pass": true
  },
  "light_preassembly": {
    "method": "Actual C-sector rotational swept envelopes of each precurved AL/LED ring against the isolated one-piece O1 carrier, with an additional 1 degree margin beyond the C opening at both ends. The nonexistent front opening is not treated as material; actual strips have larger end margins. Wires attach only after placement.",
    "results": [
      {
        "carrier": "O1",
        "ring": "outer",
        "swept_intersection_mm3": 0,
        "passed": true
      },
      {
        "carrier": "O1",
        "ring": "inner",
        "swept_intersection_mm3": 0,
        "passed": true
      }
    ]
  },
  "diffuser_float": {
    "clearance_mm": 0.3999999999999986,
    "nominal_top_z_mm": 32.2,
    "retainer_underside_z_mm": 32.6,
    "method": "Only the central 1.4mm diffuser zone is shifted upwards by 0.1mm less than its B1 clearance. The outer structural rim remains a fixed seating surface and is excluded from this float check.",
    "results": [
      {
        "part": "D1 central zone",
        "intersections": []
      }
    ]
  },
  "wire_holes": {
    "type": "Original inner channel bores enlarged with congruent copies of the outer bores; both added platform holes refilled",
    "residual_matched_inner_bore_material_mm3": 2.20809691812205e-06,
    "removed_platform_holes": [
      {
        "center_xy_mm": [
          -24.544942994249677,
          -50.04529972039509
        ],
        "missing_refilled_material_mm3": 0.019301683718314293
      },
      {
        "center_xy_mm": [
          -23.89012736889626,
          -84.7074355273891
        ],
        "missing_refilled_material_mm3": 0
      }
    ],
    "all_passed": true
  },
  "all_nominal_checks_pass": true
}