{
  "cover": {
    "method": "Exported A1/L1 rigid entry and full final solids plus installed BAT/PWM/XT30/Q1/Q2 and LED-side tails, 19 rigid poses, and an exact annular sweep of all eight cover locking lugs. Only the two elastic bumps are excluded from rigid entry/rotation; both short vertical tab bodies remain in the checks and travel through dedicated flange channels. Final bumps occupy recessed notches in the outer shell.",
    "entry_intersection_mm3": 1.2518273711905184e-06,
    "final_intersection_mm3": 3.14882043440305e-13,
    "rigid_rotation_poses": [
      {
        "angle_deg": -9.0,
        "intersection_mm3": 1.2518273711905184e-06
      },
      {
        "angle_deg": -8.5,
        "intersection_mm3": 1.2517583956741378e-06
      },
      {
        "angle_deg": -8.0,
        "intersection_mm3": 1.2518273344035088e-06
      },
      {
        "angle_deg": -7.5,
        "intersection_mm3": 1.251827366731991e-06
      },
      {
        "angle_deg": -7.0,
        "intersection_mm3": 1.2518273664960439e-06
      },
      {
        "angle_deg": -6.5,
        "intersection_mm3": 1.2518273961233056e-06
      },
      {
        "angle_deg": -6.0,
        "intersection_mm3": 1.2518110678066808e-06
      },
      {
        "angle_deg": -5.5,
        "intersection_mm3": 1.2518273426720733e-06
      },
      {
        "angle_deg": -5.0,
        "intersection_mm3": 1.2515767597816777e-06
      },
      {
        "angle_deg": -4.5,
        "intersection_mm3": 1.2459957037102284e-06
      },
      {
        "angle_deg": -4.0,
        "intersection_mm3": 1.1727604792877641e-06
      },
      {
        "angle_deg": -3.5,
        "intersection_mm3": 1.1727605224423536e-06
      },
      {
        "angle_deg": -3.0,
        "intersection_mm3": 1.1673882203035515e-06
      },
      {
        "angle_deg": -2.5,
        "intersection_mm3": 1.0570747998137197e-06
      },
      {
        "angle_deg": -2.0,
        "intersection_mm3": 1.0328375866301623e-06
      },
      {
        "angle_deg": -1.5,
        "intersection_mm3": 6.71326912823566e-07
      },
      {
        "angle_deg": -1.0,
        "intersection_mm3": 2.823098108021951e-07
      },
      {
        "angle_deg": -0.5,
        "intersection_mm3": 5.773159728050814e-15
      },
      {
        "angle_deg": 0.0,
        "intersection_mm3": 4.2646441933413826e-14
      }
    ],
    "exact_lug_sweep_intersection_mm3": 0.0,
    "radial_guide_clearance_mm": 0.09999999999999432,
    "lug_outer_clearance_mm": 0.44999999999998863,
    "lug_z_clearance_each_side_mm": 0.25,
    "receiver_structure": {
      "type": "continuous_slotted_flange_integrated_with_outer_wall",
      "radial_width_mm": 6.400000000000006,
      "retainer_thickness_mm": 2.1500000000000004,
      "rib_count": 0,
      "boundary": "The flange overlaps and unions with the A1 outer wall; no independent inner receiver or spoke ribs remain. Physical strength, insertion force and cycle life still require T_cover_lock_A/T_cover_lock_B tests."
    },
    "detent": {
      "count": 2,
      "type": "short_wide_vertical_radial_flex_tab",
      "arm_effective_length_mm": 8.0,
      "arm_width_deg": 5.0,
      "arm_thickness_mm": 1.0,
      "intended_deflection_mm": 0.2,
      "intended_lift_mm": 0.2,
      "beam_strain_estimate": 0.004687500000000001,
      "boundary": "Insertion force, fatigue, creep and cycle life require physical T_cover_lock_A/T_cover_lock_B tests."
    },
    "all_certified": true
  },
  "all_certified": true,
  "boundary": "Only the L1 cover bayonet remains active. B1 uses direct gravity seating; its clearance and vertical path are certified in clearance-check.json and assembly-paths.json."
}