{
  "method": "Vertical swept-path exclusion uses adaptive Z slabs and exact manifold XY projections, plus an exact initial-position solid intersection. A moving thin band is compared with all fixed material it can cross during travel; a terminal projected overlap is a swept collision and is NOT discarded merely because the final-position solid intersection is zero. O1 carries both AL/LED rings. B1 drops vertically in its final orientation with no rotary lock; only L1 uses the retained cover bayonet. Terminal slab thickness is below 0.025 mm; zero-thickness intended seating contacts are excluded by 0.001 mm and projected area threshold is 0.001 mm2. Flexible wires and detent elasticity remain outside this rigid check.",
  "moves": [
    {
      "part": "A1",
      "moving_components": [
        "A1"
      ],
      "label": "整体底座下落",
      "start_offset": [
        0,
        0,
        60
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [],
      "projection_operations": 0,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "O1",
      "moving_components": [
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2"
      ],
      "label": "预装内外两圈灯带和铝背板的整体反射腔从上方落入",
      "start_offset": [
        0,
        0,
        75
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1"
      ],
      "projection_operations": 5,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "D1",
      "moving_components": [
        "D1"
      ],
      "label": "加厚整体扩散遮盖环从上方放到O1承托面",
      "start_offset": [
        0,
        0,
        60
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2"
      ],
      "projection_operations": 1,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "B1",
      "moving_components": [
        "B1"
      ],
      "label": "已打印冻结墙顶一体件保持最终方向，从上方直接放到外圈承托面；不旋转不锁紧",
      "start_offset": [
        0,
        0,
        165
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1"
      ],
      "projection_operations": 7,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "BAT",
      "moving_components": [
        "BAT"
      ],
      "label": "封装电池由底部横置放入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1"
      ],
      "projection_operations": 1,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "PWM",
      "moving_components": [
        "PWM"
      ],
      "label": "开关调光控制器由底部横置放入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT"
      ],
      "projection_operations": 1,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "XT30",
      "moving_components": [
        "XT30"
      ],
      "label": "供电换插接头由底部放入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT",
        "PWM"
      ],
      "projection_operations": 1,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "Q1",
      "moving_components": [
        "Q1"
      ],
      "label": "外圈LED1可拆接头由底部放入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT",
        "PWM",
        "XT30"
      ],
      "projection_operations": 1,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "Q2",
      "moving_components": [
        "Q2"
      ],
      "label": "内圈LED2可拆接头由底部放入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": 0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT",
        "PWM",
        "XT30",
        "Q1"
      ],
      "projection_operations": 2,
      "certified": true,
      "problems": [],
      "elastic_exclusions": []
    },
    {
      "part": "L1",
      "moving_components": [
        "L1"
      ],
      "label": "无螺钉整体底盖错开9°从下方装入",
      "start_offset": [
        0,
        0,
        -65
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": -9.0,
      "end_rotation_deg": -9.0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT",
        "PWM",
        "XT30",
        "Q1",
        "Q2"
      ],
      "projection_operations": 14,
      "certified": true,
      "problems": [],
      "elastic_exclusions": [
        "cover_detent_bumps"
      ]
    },
    {
      "part": "L1",
      "moving_components": [
        "L1"
      ],
      "label": "无螺钉底盖旋转9°锁定；两道打印弹片止退",
      "start_offset": [
        0,
        0,
        0
      ],
      "end_offset": [
        0,
        0,
        0
      ],
      "start_rotation_deg": -9.0,
      "end_rotation_deg": 0,
      "fixed": [
        "A1",
        "O1",
        "AL1",
        "AL2",
        "LED1",
        "LED2",
        "D1",
        "B1",
        "BAT",
        "PWM",
        "XT30",
        "Q1",
        "Q2"
      ],
      "projection_operations": 0,
      "certified": true,
      "problems": [],
      "evidence": "bayonet-check.json:cover",
      "joint": "cover"
    }
  ],
  "all_certified": true
}