{
  "units": "mm",
  "version": "5.0.0",
  "design": {
    "outer_diameter_mm": 206.79999999999998,
    "base_diameter_mm": 200.0,
    "overall_height_mm": 161.57074652089273,
    "base_height_mm": 34.6,
    "eave_extension_mm": 4.0,
    "eave_outer_diameter_mm": 206.79999999999998,
    "roof_drop_mm": 15.857824907678676,
    "courtyard_clear_diameter_mm": 81.8,
    "body_radii_mm": [
      44.62704604296745,
      67.81352302148372,
      91.0
    ],
    "a1_reinforcement": {
      "inner_wall_top_mm": 29.8,
      "inner_wall_radial_thickness_mm": 3.927046042967447,
      "rib_thickness_mm": 3.2,
      "rib_angles_deg": [
        30.0,
        255.0,
        315.0
      ],
      "rib_z_span_mm": [
        5.3,
        20.4
      ],
      "front_bridge_thickness_mm": 3.2,
      "front_slope_angle_deg": 45,
      "print_orientation": "upright"
    },
    "a1_outer_lip": {
      "top_mm": 34.6,
      "rise_mm": 2.0,
      "radial_clearance_to_frozen_B1_mm": 0.20000000000000284,
      "locating_only": true,
      "entrance_top_mm": 32.2
    },
    "direct_seat": {
      "type": "gravity_only_D1_outer_structural_rim",
      "support_part": "D1",
      "load_path": "B1 outer foot → D1 outer rim → O1 outer wall → A1 ledges",
      "inner_radius_mm": 96.1,
      "outer_radius_mm": 98.0,
      "low_mm": 30.8,
      "top_mm": 32.6,
      "rim_height_mm": 1.8000000000000007,
      "seat_angle_deg": 341.59999999999997,
      "frozen_B1_outer_foot_radii_mm": [
        92.5,
        98.2
      ],
      "radial_contact_width_mm": 1.9000000000000057,
      "inner_underside_vertical_clearance_mm": 0.5499999999999972,
      "locking": false,
      "boundary": "B1 STL hash is frozen; L1 has the revised rear cable relief; the 1.4mm central diffuser is not the B1 contact surface. No claim of anti-slip, tip resistance or physical fit without a physical test."
    },
    "column_count": 40,
    "grid_pitch_mm": 7.01,
    "level_pitch_mm": 18.285714285714285,
    "body_level_count": 6,
    "roof_ring_count": 7,
    "continuous_round_ridge": true,
    "strip_lengths_mm": [
      550.0,
      275.0
    ],
    "rated_LED_power_W": 4.125,
    "diffuser_radial_width_mm": 48.4,
    "diffuser_thickness_mm": 1.4,
    "diffuser_bottom_mm": 30.8,
    "diffuser_top_mm": 32.2,
    "decor_diameter_mm": 3.2,
    "decor_profile": "3.2mm octagonal across flats / 1.6mm flat / 45-degree chamfers; circular swept ridge",
    "roof_body_join_z_mm": {
      "inner": 114.97074652089275,
      "outer": 127.22857142857141
    },
    "optical_channel_floor_mm": 22.400000000000002,
    "optical_support": "O1 open carrier with enlarged one-piece 1.4mm D1; O2 eliminated; no automatic support for O1 or D1",
    "front_bridge_lateral_clearance_each_side_mm": 2.0,
    "optical_front": {
      "relief_side_x_mm": [
        -17.0,
        17.0
      ],
      "diffuser_side_x_mm": [
        -16.0,
        16.0
      ],
      "full_height_parallel_relief": true,
      "diffuser_to_al_top_clearance_mm": 0.09999999999999787
    },
    "optical_end_cover": "Enlarged D1 covers both LED channels and the central opening; O1 supports its inner and outer edges; no separate O2 or rear link notches",
    "removed_near_wall_roof_ring_mm": 94.20386372042393,
    "outer_eave_center_span_mm": 12.482001945808351,
    "merged_single_piece": [
      "A1",
      "B1",
      "O1",
      "D1",
      "L1"
    ],
    "roof_body_connection": "坡屋顶沿实际交线与内外墙正体积相交并合并；取消稀疏连接柱；连续圆滑屋脊；B1实物冻结",
    "external_power_port": {
      "type": "side_bottom_open_cable_slot",
      "angle_deg": 90.0,
      "radius_mm": 100.0,
      "inner_radius_mm": 90.5,
      "outer_radius_mm": 105.0,
      "diameter_mm": 10.0,
      "center_z_mm": 12.0,
      "z_span_mm": [
        -1.0,
        17.0
      ],
      "boundary": "背面90°（+Y）侧壁水平圆孔向下贯通到底沿，L1仅做对应边缘让位；不是底面竖直孔、面板DC插座或拉力固定件，完整线束闭环前禁止接电"
    },
    "cover_lock": {
      "radius_mm": 92.0,
      "count": 8,
      "rotation_deg": 9.0,
      "lug_angle_deg": 5.0,
      "lug_thickness_mm": 1.6,
      "slot_z_clearance_mm": 0.25,
      "receiver_radial_thickness_mm": 6.400000000000006,
      "receiver_retainer_thickness_mm": 2.1500000000000004,
      "receiver_integrated_with_wall": true,
      "receiver_rib_count": 0,
      "detent_count": 2,
      "detent_arm_length_mm": 8.0,
      "detent_width_deg": 5.0,
      "detent_thickness_mm": 1.0,
      "detent_deflection_mm": 0.2
    }
  },
  "materials": {
    "1": {
      "name": "PLA Matte Bone White",
      "code": "11103",
      "color": "#E6DFCC"
    },
    "2": {
      "name": "PLA Matte Charcoal",
      "code": "11101",
      "color": "#242828"
    },
    "3": {
      "name": "PLA Translucent Citrine",
      "code": "13410",
      "color": "#E7B747"
    },
    "4": {
      "name": "Purchased envelope",
      "color": "#526474"
    },
    "5": {
      "name": "COB 3000K",
      "color": "#FFD49B"
    },
    "6": {
      "name": "Aluminum",
      "color": "#A0A5A7"
    },
    "7": {
      "name": "Red wire",
      "color": "#AC2424"
    },
    "8": {
      "name": "Black wire",
      "color": "#161616"
    }
  },
  "parts": [
    {
      "id": "Q1",
      "material": 4,
      "group": "purchased",
      "description": "Q1＝外圈LED1的JST RCY两针可拆接头；用于光学组件断电拆装",
      "file": "parts/Q1.stl",
      "bounds": [
        [
          -68.72889709472656,
          -53.13484573364258,
          3.0
        ],
        [
          -49.22899627685547,
          -29.460161209106445,
          8.0
        ]
      ],
      "volume_mm3": 840.0001702598456,
      "area_mm2": 646.0000882177069,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "TAIL1_red",
      "material": 7,
      "group": "wire",
      "description": "灯带焊盘侧独立支线；24AWG；控制器侧线尾仍待供货图闭环",
      "file": "parts/TAIL1_red.stl",
      "bounds": [
        [
          -69.37516784667969,
          -89.1693344116211,
          4.940000057220459
        ],
        [
          -33.39240264892578,
          -40.870243072509766,
          26.600000381469727
        ]
      ],
      "volume_mm3": 96.98794045091131,
      "area_mm2": 312.23087925379866,
      "faces": 140,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "route_length_mm": 74.12158411352283,
      "cut_length_mm": 100,
      "termination_allowance_mm": 20,
      "ring": "outer"
    },
    {
      "id": "TAIL1_black",
      "material": 8,
      "group": "wire",
      "description": "灯带焊盘侧独立支线；24AWG；控制器侧线尾仍待供货图闭环",
      "file": "parts/TAIL1_black.stl",
      "bounds": [
        [
          -66.22623443603516,
          -91.36865234375,
          4.940000057220459
        ],
        [
          -27.79665184020996,
          -45.03155517578125,
          26.600000381469727
        ]
      ],
      "volume_mm3": 96.08510328132418,
      "area_mm2": 311.0237932990974,
      "faces": 140,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "route_length_mm": 73.96771368873277,
      "cut_length_mm": 100,
      "termination_allowance_mm": 20,
      "ring": "outer"
    },
    {
      "id": "Q2",
      "material": 4,
      "group": "purchased",
      "description": "Q2＝内圈LED2的JST RCY两针可拆接头；用于光学组件断电拆装",
      "file": "parts/Q2.stl",
      "bounds": [
        [
          -50.00954818725586,
          -56.35727310180664,
          3.0
        ],
        [
          -27.124967575073242,
          -35.56806182861328,
          8.0
        ]
      ],
      "volume_mm3": 839.9999336206565,
      "area_mm2": 645.9999617688547,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "TAIL2_red",
      "material": 7,
      "group": "wire",
      "description": "灯带焊盘侧独立支线；24AWG；控制器侧线尾仍待供货图闭环",
      "file": "parts/TAIL2_red.stl",
      "bounds": [
        [
          -43.48378372192383,
          -54.23228454589844,
          4.870907783508301
        ],
        [
          -25.90610694885254,
          -42.692684173583984,
          26.600000381469727
        ]
      ],
      "volume_mm3": 39.6954362323437,
      "area_mm2": 148.690770159409,
      "faces": 116,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "route_length_mm": 34.902669236060184,
      "cut_length_mm": 60,
      "termination_allowance_mm": 20,
      "ring": "inner"
    },
    {
      "id": "TAIL2_black",
      "material": 8,
      "group": "wire",
      "description": "灯带焊盘侧独立支线；24AWG；控制器侧线尾仍待供货图闭环",
      "file": "parts/TAIL2_black.stl",
      "bounds": [
        [
          -39.52688980102539,
          -56.553104400634766,
          4.870907783508301
        ],
        [
          -22.353300094604492,
          -44.68012237548828,
          26.600000381469727
        ]
      ],
      "volume_mm3": 38.52830630802762,
      "area_mm2": 148.24828989275272,
      "faces": 116,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "route_length_mm": 35.05946726293237,
      "cut_length_mm": 60,
      "termination_allowance_mm": 20,
      "ring": "inner"
    },
    {
      "id": "A1",
      "material": 2,
      "group": "base",
      "description": "200mm整体底座／外圈加高2mm辅助定位／O1下承托台阶／内圈无紧配无旋转锁／3.2mm立筋与45°前桥／外壁一体式底盖9°卡口法兰／背面90°下开式电源过线口／BAT与PWM三边导向框及全部连接杆已删除",
      "file": "parts/A1.stl",
      "bounds": [
        [
          -100.0,
          -100.0,
          0.0
        ],
        [
          100.0,
          100.0,
          34.599998474121094
        ]
      ],
      "volume_mm3": 97066.16673213651,
      "area_mm2": 85077.69057610174,
      "faces": 36464,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "L1",
      "material": 2,
      "group": "cover",
      "description": "整体环形底盖／8点9°隐藏旋转卡口／背面电源口底沿让位／无螺钉平面承托",
      "file": "parts/L1.stl",
      "bounds": [
        [
          -98.5999984741211,
          -97.75,
          0.0
        ],
        [
          97.75,
          97.6216049194336,
          10.5
        ]
      ],
      "volume_mm3": 70077.65360124188,
      "area_mm2": 50447.48023320318,
      "faces": 8082,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "O1",
      "material": 1,
      "group": "reflector",
      "description": "整体C形开放双灯槽／1.2mm槽底／前方平行贯通让位／无中央支撑柱／内圈原孔道按外圈同形扩大／无平台新增孔",
      "file": "parts/O1.stl",
      "bounds": [
        [
          -97.99996185302734,
          -96.5136947631836,
          21.200000762939453
        ],
        [
          97.99996185302734,
          98.0,
          30.799999237060547
        ]
      ],
      "volume_mm3": 40880.14723158581,
      "area_mm2": 58414.51742034334,
      "faces": 17528,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "D1",
      "material": 3,
      "group": "diffuser",
      "description": "黄水晶整体C形扩散遮盖环／中央1.4mm／外缘1.8mm高承托框直接承托B1／替代独立O2",
      "file": "parts/D1.stl",
      "bounds": [
        [
          -97.99968719482422,
          -95.7226791381836,
          30.799999237060547
        ],
        [
          97.99968719482422,
          97.99906158447266,
          32.599998474121094
        ]
      ],
      "volume_mm3": 30290.401975496265,
      "area_mm2": 44448.47215563906,
      "faces": 11728,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "LED1",
      "material": 5,
      "group": "purchased",
      "description": "LEDYi 12V 8mm 5W/m；独立C形同心灯圈",
      "file": "parts/LED1.stl",
      "bounds": [
        [
          -96.19922637939453,
          -92.37430572509766,
          22.600000381469727
        ],
        [
          96.19922637939453,
          96.19908142089844,
          30.600000381469727
        ]
      ],
      "volume_mm3": 8708.413523852461,
      "area_mm2": 10917.599634245278,
      "faces": 5244,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "length_mm": 550.0,
      "power_W": 2.75,
      "cut_pitch_mm": 25,
      "center_angle_deg": 450,
      "start_angle_deg": 286.21268850210356,
      "end_angle_deg": 613.7873114978964,
      "emit_direction": "inward",
      "emit_radius_mm": 94.2,
      "strip_radius_mm": 96.2,
      "ring": "outer"
    },
    {
      "id": "AL1",
      "material": 6,
      "group": "purchased",
      "description": "1mm隐藏弧形铝背板／灯带散热与预弯基面",
      "file": "parts/AL1.stl",
      "bounds": [
        [
          -97.24978637695312,
          -93.47676086425781,
          22.5
        ],
        [
          97.24978637695312,
          97.24906921386719,
          30.700000762939453
        ]
      ],
      "volume_mm3": 4541.26598720397,
      "area_mm2": 10206.644622291307,
      "faces": 5244,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "length_mm": 553.82,
      "width_mm": 8.2,
      "ring": "outer"
    },
    {
      "id": "LED2",
      "material": 5,
      "group": "purchased",
      "description": "LEDYi 12V 8mm 5W/m；独立C形同心灯圈",
      "file": "parts/LED2.stl",
      "bounds": [
        [
          -51.899566650390625,
          -46.951805114746094,
          22.600000381469727
        ],
        [
          51.899566650390625,
          51.899505615234375,
          30.600000381469727
        ]
      ],
      "volume_mm3": 4399.944483115728,
      "area_mm2": 5531.972161154319,
      "faces": 4956,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "length_mm": 275.0,
      "power_W": 1.375,
      "cut_pitch_mm": 25,
      "center_angle_deg": 450,
      "start_angle_deg": 295.22259954717447,
      "end_angle_deg": 604.7774004528255,
      "emit_direction": "outward",
      "emit_radius_mm": 51.9,
      "strip_radius_mm": 50.9,
      "ring": "inner"
    },
    {
      "id": "AL2",
      "material": 6,
      "group": "purchased",
      "description": "1mm隐藏弧形铝背板／灯带散热与预弯基面",
      "file": "parts/AL2.stl",
      "bounds": [
        [
          -49.84989547729492,
          -45.1711311340332,
          22.5
        ],
        [
          49.84989547729492,
          49.849525451660156,
          30.700000762939453
        ]
      ],
      "volume_mm3": 2189.128594488014,
      "area_mm2": 4928.632618313208,
      "faces": 4956,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "length_mm": 266.97,
      "width_mm": 8.2,
      "ring": "inner"
    },
    {
      "id": "B1",
      "material": 1,
      "group": "body",
      "description": "已打印冻结墙顶一体件／3.2mm格架／外挑4mm／原底部凸耳仅让位不锁紧／由D1外缘厚框直接承托",
      "file": "parts/B1.stl",
      "bounds": [
        [
          -103.39437103271484,
          -103.39859008789062,
          30.350000381469727
        ],
        [
          103.4000015258789,
          103.39859008789062,
          161.57073974609375
        ]
      ],
      "volume_mm3": 207910.40069517816,
      "area_mm2": 251217.2460154718,
      "faces": 234888,
      "watertight": true,
      "components": 1,
      "print_rotation": 0,
      "frozen_sha256": "ec7ec141d9c8b4dff798f797c1343347464f95368377850e1483d117dd134aa2"
    },
    {
      "id": "BAT",
      "material": 4,
      "group": "purchased",
      "description": "BAT＝3S1P 1000mAh封装电池包络；底座下层横置",
      "file": "parts/BAT.stl",
      "bounds": [
        [
          -37.5,
          46.20000076293945,
          3.0
        ],
        [
          37.5,
          86.19999694824219,
          21.0
        ]
      ],
      "volume_mm3": 53999.99485015869,
      "area_mm2": 10139.999290466309,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "PWM",
      "material": 4,
      "group": "purchased",
      "description": "PWM＝Skydance VD1开关与调光控制器；73×35×14mm；底座下层横置",
      "file": "parts/PWM.stl",
      "bounds": [
        [
          -87.09239196777344,
          -27.784019470214844,
          3.0
        ],
        [
          -39.94780731201172,
          50.184635162353516,
          17.0
        ]
      ],
      "volume_mm3": 35769.99898992246,
      "area_mm2": 8133.999857595969,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "XT30",
      "material": 4,
      "group": "purchased",
      "description": "XT30＝设备供电换插接头；电池与外置12V适配器二选一接入，禁止并联",
      "file": "parts/XT30.stl",
      "bounds": [
        [
          62.0,
          -11.5,
          4.0
        ],
        [
          74.0,
          11.5,
          14.0
        ]
      ],
      "volume_mm3": 2760.0,
      "area_mm2": 1252.0,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_grid",
      "material": 1,
      "group": "test",
      "description": "3.2mm平底八角格架／约7.01mm列距／18.286mm环距／短跨桥接",
      "file": "parts/T_grid.stl",
      "bounds": [
        [
          -2.0,
          -3.0,
          -0.4000000059604645
        ],
        [
          30.040000915527344,
          3.0,
          57.657142639160156
        ]
      ],
      "volume_mm3": 3365.546560267534,
      "area_mm2": 3924.252072692988,
      "faces": 652,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_roof",
      "material": 1,
      "group": "test",
      "description": "实际坡屋顶—内外墙相交扇段／3.2mm格架／连续圆滑屋脊",
      "file": "parts/T_roof.stl",
      "bounds": [
        [
          34.808929443359375,
          0.0,
          109.97074890136719
        ],
        [
          103.4000015258789,
          60.77580642700195,
          161.57073974609375
        ]
      ],
      "volume_mm3": 7191.481130630076,
      "area_mm2": 10045.444035688182,
      "faces": 11742,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_door",
      "material": 1,
      "group": "test",
      "description": "实际门洞左右上角／三层墙拱框／局部可接近支撑",
      "file": "parts/T_door.stl",
      "bounds": [
        [
          -69.43724060058594,
          -95.9275131225586,
          30.350000381469727
        ],
        [
          69.43724060058594,
          -30.42304039001465,
          78.0
        ]
      ],
      "volume_mm3": 15851.303760078337,
      "area_mm2": 19225.539169356147,
      "faces": 16874,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_diff_06",
      "material": 3,
      "group": "test",
      "description": "透光厚度比较／平整面",
      "file": "parts/T_diff_06.stl",
      "bounds": [
        [
          -16.0,
          -11.0,
          0.0
        ],
        [
          16.0,
          11.0,
          0.6000000238418579
        ]
      ],
      "volume_mm3": 422.40001678466797,
      "area_mm2": 1472.8000025749207,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_diff_08",
      "material": 3,
      "group": "test",
      "description": "透光厚度比较／平整面",
      "file": "parts/T_diff_08.stl",
      "bounds": [
        [
          -16.0,
          -11.0,
          0.0
        ],
        [
          16.0,
          11.0,
          0.800000011920929
        ]
      ],
      "volume_mm3": 563.200008392334,
      "area_mm2": 1494.4000012874603,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_diff_10",
      "material": 3,
      "group": "test",
      "description": "透光厚度比较／平整面",
      "file": "parts/T_diff_10.stl",
      "bounds": [
        [
          -16.0,
          -11.0,
          0.0
        ],
        [
          16.0,
          11.0,
          1.0
        ]
      ],
      "volume_mm3": 704.0,
      "area_mm2": 1516.0,
      "faces": 12,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_diff_texture",
      "material": 3,
      "group": "test",
      "description": "0.8mm基片＋直径0.4mm浅筋；凸高0.2mm、总厚1.0mm",
      "file": "parts/T_diff_texture.stl",
      "bounds": [
        [
          -16.0,
          -11.0,
          0.0
        ],
        [
          16.0,
          11.0,
          1.0
        ]
      ],
      "volume_mm3": 581.2000071363365,
      "area_mm2": 1562.5497852169992,
      "faces": 432,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_cover_lock_A",
      "material": 2,
      "group": "test",
      "description": "实际底座侧底盖卡口扇段／外壁一体法兰＋入口槽＋周向槽＋止退窝",
      "file": "parts/T_cover_lock_A.stl",
      "bounds": [
        [
          37.70000076293945,
          21.61435890197754,
          0.0
        ],
        [
          96.59258270263672,
          91.35454559326172,
          12.0
        ]
      ],
      "volume_mm3": 4234.239948221092,
      "area_mm2": 4619.389800216361,
      "faces": 2612,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_cover_lock_B",
      "material": 2,
      "group": "test",
      "description": "实际底盖侧卡口扇段／锁耳＋8mm短宽弹片止退",
      "file": "parts/T_cover_lock_B.stl",
      "bounds": [
        [
          18.497180938720703,
          11.770325660705566,
          0.0
        ],
        [
          94.41925048828125,
          89.299072265625,
          10.5
        ]
      ],
      "volume_mm3": 10235.518616288424,
      "area_mm2": 7726.767137274103,
      "faces": 1500,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_optical_O",
      "material": 1,
      "group": "test",
      "description": "开放双灯槽／1.2mm槽底／50°反射面／免支撑径向段",
      "file": "parts/T_optical_O.stl",
      "bounds": [
        [
          30.85375213623047,
          16.416919708251953,
          21.200000762939453
        ],
        [
          92.08961486816406,
          75.07222747802734,
          30.799999237060547
        ]
      ],
      "volume_mm3": 3685.282446295998,
      "area_mm2": 5437.433418822947,
      "faces": 1642,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_optical_D",
      "material": 3,
      "group": "test",
      "description": "双圈实际光学径向段／48.40mm宽／1.4mm厚扩散遮盖片",
      "file": "parts/T_optical_D.stl",
      "bounds": [
        [
          30.789243698120117,
          16.382625579833984,
          30.799999237060547
        ],
        [
          92.08909606933594,
          75.07166290283203,
          32.599998474121094
        ]
      ],
      "volume_mm3": 2717.6925159619336,
      "area_mm2": 4116.644687741822,
      "faces": 1072,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_front_A",
      "material": 2,
      "group": "test",
      "description": "左侧25°前跨梁与内环根部试件／右侧对称／与正式A1相同正放打印",
      "file": "parts/T_front_A.stl",
      "bounds": [
        [
          -42.26182556152344,
          -100.0,
          20.0
        ],
        [
          0.0,
          -37.067989349365234,
          34.599998474121094
        ]
      ],
      "volume_mm3": 9010.862404229238,
      "area_mm2": 5077.1134501124325,
      "faces": 1942,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_front_B",
      "material": 1,
      "group": "test",
      "description": "左侧25°墙底连接及跨梁根部顶面试件／右侧对称",
      "file": "parts/T_front_B.stl",
      "bounds": [
        [
          -19.2291316986084,
          -45.5,
          30.350000381469727
        ],
        [
          0.0,
          -39.33375930786133,
          35.79999923706055
        ]
      ],
      "volume_mm3": 213.1569465622891,
      "area_mm2": 315.02520628991675,
      "faces": 812,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_front_O1",
      "material": 1,
      "group": "test",
      "description": "左侧25°反射腔前缘平行贯通让位试件／右侧对称",
      "file": "parts/T_front_O1.stl",
      "bounds": [
        [
          -41.41635513305664,
          -96.5136947631836,
          21.200000762939453
        ],
        [
          -17.0,
          -43.502525329589844,
          30.799999237060547
        ]
      ],
      "volume_mm3": 1399.490682650925,
      "area_mm2": 2208.172457090216,
      "faces": 840,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "T_front_D",
      "material": 3,
      "group": "test",
      "description": "左侧25°扩散环前缘平行边界试件／右侧对称",
      "file": "parts/T_front_D.stl",
      "bounds": [
        [
          -41.416404724121094,
          -95.7226791381836,
          30.799999237060547
        ],
        [
          -16.0,
          -43.411949157714844,
          32.599998474121094
        ]
      ],
      "volume_mm3": 1103.7902583543996,
      "area_mm2": 1758.4334957939848,
      "faces": 420,
      "watertight": true,
      "components": 1,
      "print_rotation": 0
    },
    {
      "id": "C1",
      "material": 2,
      "group": "fixture",
      "description": "倒置维护托架；只承托底座外缘；屋顶悬空9.429mm",
      "file": "parts/C1.stl",
      "bounds": [
        [
          60.0,
          -20.0,
          0.0
        ],
        [
          160.0,
          20.0,
          150.39999389648438
        ]
      ],
      "volume_mm3": 38707.326358941245,
      "area_mm2": 18698.872364332714,
      "faces": 120,
      "watertight": true,
      "components": 1,
      "print_rotation": 90
    },
    {
      "id": "C2",
      "material": 2,
      "group": "fixture",
      "description": "倒置维护托架；只承托底座外缘；屋顶悬空9.429mm",
      "file": "parts/C2.stl",
      "bounds": [
        [
          -97.32051086425781,
          41.961524963378906,
          0.0
        ],
        [
          -12.679491996765137,
          148.56405639648438,
          150.39999389648438
        ]
      ],
      "volume_mm3": 38707.312954202476,
      "area_mm2": 18698.869392261215,
      "faces": 120,
      "watertight": true,
      "components": 1,
      "print_rotation": -30
    },
    {
      "id": "C3",
      "material": 2,
      "group": "fixture",
      "description": "倒置维护托架；只承托底座外缘；屋顶悬空9.429mm",
      "file": "parts/C3.stl",
      "bounds": [
        [
          -97.32051086425781,
          -148.56405639648438,
          0.0
        ],
        [
          -12.679491996765137,
          -41.961524963378906,
          150.39999389648438
        ]
      ],
      "volume_mm3": 38707.3129215976,
      "area_mm2": 18698.869392261324,
      "faces": 120,
      "watertight": true,
      "components": 1,
      "print_rotation": -150
    }
  ]
}